H
A C D E G H I L M N O P R T V W Y
- How can I reset the NetCom to factory settings?
Sometimes it is required to clear any configuration done, and go back to the Factory Settings. Users might think this is possible with the Reset ... - How to configure networking on OnRISC?
Debian's networking configuration is done in the following files: /etc/network/interfaces (see http://www.digipedia.pl/man/interfaces.5.html for further details) /etc/resolv.conf (see http://linux.die.net/man/5/resolv.conf for further details) For dynamic IP address assignment ... - How to configure the serial card for my baudrate? It is not available in the Device Manager.
The Device Manager is the wrong location to configure your serial port. Your application is responsible to configure the required serial parameters, not the Device ... - How to configure the serial port of USB-COM for my baudrate? It is not available in the Device Manager.
The Device Manager is the wrong location to configure your serial port. Your Application is responsible to configure the required serial parameters, not the Device Manager. Please ... - How to configure the NetCom for my baudrate? This speed is not available in the Device Manager.
The Device Manager is the wrong location to configure your serial port. Your application is responsible to configure the required serial parameters, not the Device Manager. Please ... - How to install Java Virtual Machine (JVM) and Compiler (SDK) on the OnRISC devices?
For Debian 6.0 and newer: apt-get install openjdk-6-jdk For Debian 5.0: apt-get install free-java-sdk ... - How can I check a problem with my NetCom Server?
First of all be sure to have the latest firmware version the latest driver version the latest version of the manual All these components are available for download, either ... - How to force thorough file system check for the microSD/CF card?
To check the file system make following steps: 1. Enter BIOS->System Console 2. execute e2fsck for desired medium for internal microSD card execute e2fsck -fy /dev/sda1 for CompactFlash card ... - How to install and configure NFS server?
Execute make menuconfig and enable "File systems->Dnotify" and "File systems->Network File Systems>NFS file system support" and support for NFS server either for NFS v3 or NFS v4 recompile ... - How to install VScom PCI drivers in Windows 7
Windows 7 does not install drivers for VScom PCI cards in the way known up to Vista. A new installation software is provided for download. ... - How to bound USB mass storage device to some specific mounting point?
To achieve this you'll need to add udev rule to /etc/udev/rules.d/custom.rules. For example bound USB stick with name "DataTraveler 2.0" to /dev/mobilex add following rule: BUS=="scsi", SYSFS{model}=="DataTraveler 2.0", NAME{all_partitions}="mobile" This will create ... - How to change I/O Address and IRQ of your parallel PCI port?
There is one short answer: Not possible. There is a detailed answer: PCI is a Plug&Play system. Resources like I/O addresses and IRQ are assigned by the ... - How can I change the name (number) of a Virtual Com Port
You can only define and change the name of a Virtal Com Port, once the driver is installed. So complete the installation of the drivers ... - How to receive syslog messages on a Windows host?
For this purpose you can use on of the various Syslog Server Software like these: 1. Kiwi Syslog Server 2. Syslog Server 3. MirkoTik Syslog Daemon ... - How could BIOS prior 2.1 be updated to the latest version?
The update image format has changed since 2.1. To be able to update to BIOS version 2.9 one will have to update to BIOS 2.1 ... - How to use socat to create fixed TTY device in Linux?
If you just need to exchange data with your serial attached devices and the application doesn't care about modem signals, you can use socat to ... - How can I use your vs_can_api library from other languages than C/C++?
You can use any programing language that provides calling functions from a dynamic library (*.dll or *.so files). We provide wrapper for some programming languages ... - How to burn system image to internal microSD card without extracting it?
You'll need an USB mass storage device or CF card. Download the desired system image, unpack it and copy the *.bin file to the USB ... - How to setup the proper screen resolution for GMA500 on OFPPC 3110 in Ubuntu?
Please follow these instructions: https://launchpad.net/~gma500/+archive/emgd. After that execute: xrandr --output default --mode 1024x600 ... - How to solve a Windows 7 Problem with Driver installed from CD-ROM
The instructions on the CD-ROM shipped with the USB-COM device instruct to install the driver provided on the CD-ROM, before the USB-COM device is connected ... - How CAN messages can be captured and analyzed?
Following free tools are provided for this purpose: Windows users will find both BUSMASTER and CANHacker on the supplied CD and in download area Linux users ... - How to operate COM10 to COM256 in Windows?
This question is very old, and should be answered and solved in today software since a long time. Surprisingly this comes up again from time ... - How to get a new 3.x kernel compiled?
Since kernel version 3.0 there are no more Subversion repositories for Linux kernels on our server. Instead the patches will be maintained by our Buildroot ... - Have to relay data from one CAN bus line to another, is that possible?
Yes, the devices named NetCAN Plus transfer CAN bus data via network. Usually the network destination is a PC, but another NetCAN is also ... - How do I get Windows 7 / Windows 8 (8.1) Drivers for my VScom USB-Com device?
By simply connecting it to your PC. Windows then connects to Windows Update, and loads the drivers for installation. This also happens in the same ... - How can I access CAN adapters from Java?
For now there is no vs_can_api DLL wrapper. Hence one can either use our DLL via JNI interface or use ASCII protocol with one ... - How to use the ASCII command set?
First of all it is recommended to fully read the manual section about the ASCII command set. While doing this create a short list of ... - How can I configure USB-COM-I for RS485/RS422 mode?
Inside the unit, there is only a header block (old configuration) or a header block and a DIP-Switch (new Configuration) which is used to select the mode of ... - How to install unsigned drivers in Windows 10?
Windows 10 and 8 include a “driver signature enforcement” feature. This feature prevents NetCom driver installation and must be deactivated in order to proceed with ... - How to get a quotation / offer for VScom products?
The best and fastest way to a quotation for VScom products is to visit our web based online shop. The button labeled "BUY" on the ...